Product Features

5 Litre Size

Product Features and Directions for Use

'NOVACRETE' is an opaque liquid, producing a bright, decorative film over the surface of the floor, eliminating surface dusting and simplifying subsequent maintenance.  'NOVACRETE' is ideal for beautifying and upgrading dull floor areas, providing a tough practical finish which is resistant to spills of many oils and other chemicals, at the same time prolonging the life of the floor.  Available in grey and red. For use on wood, wood composition, linoleum, quarry tiles and stone floors and brickwork. Also for internal concrete and granolithic floors which have been allowed to cure for at least nine months. The surface to be sealed must be completely clean, dry and sound - free from wax, grease, oil and dust. Stir 'NOVACRETE' thoroughly before use.  For the first coat, depending on the porosity of the floor, dilute 'NOVACRETE' with white spirit. A 10% dilution rate is normally sufficient (500ml per 5 litres) but up to 20% white spirit may be used. Mix thoroughly.  Working it well into the surface, apply first coat thinly and evenly using a sheepskin applicator or with a flat paint brush.  Allow to dry hard.  When the first coat is hard dry, apply a second coat thinly and evenly.  Before the floor is used, the second coat should be allowed to harden for at least 12-24 hours. The surface should be suitable for light traffic after this period. If possible, leave the film to harden for 48 hours.